Quick Connect Clamps for Rolled Lip Ductwork
ProAirSupply offers quick connect clamps for joining compatible rolled-lip
duct pipe and fittings in industrial dust collection, ventilation, and
material conveying systems.
Quick connect clamps provide a fast mechanical connection between two
rolled-lip components and are used throughout modular galvanized and
stainless steel ductwork systems.
Looking for a specific quick connect clamp?
Enter the duct diameter, gasket type, temperature requirement, or part number
in the ProAirSupply search bar to locate available clamps and accessories.
Quick Connect Clamp Sizes & Options
|
Specification
|
Available Options
|
|
Duct Diameter
|
Multiple sizes within the 3" through 24" quick connect ductwork range
|
|
Connection Type
|
Quick Connect Rolled Lip
|
|
Gasket Options
|
Standard or High Temperature depending on configuration
|
|
High Temperature Gasket Material
|
Silicone
|
|
High Temperature Rating
|
Up to 500°F on applicable high-temperature gasket configurations
|
Rolled Lip Quick Clamp Connections
Quick connect ductwork uses formed rolled-lip ends on pipe and fittings.
A compatible clamp fits around the two adjoining rolled lips and secures
the components together.
This connection method creates a modular duct system that can be assembled,
serviced, or modified without traditional bolted flange connections.
Standard Quick Connect Clamps
Standard quick connect clamps are used throughout compatible rolled-lip
dust collection duct systems. Select the clamp according to the outside
duct diameter and the gasket configuration required for the application.
High Temperature Quick Connect Clamps
High-temperature clamp configurations are available for selected applications.
These clamps use a silicone gasket with a maximum temperature
rating of 500°F where the high-temperature configuration
is specified.
Always verify that the clamp, gasket, ductwork, and other system components
are suitable for the actual operating temperature of the application.
Quick Connect Clamp Gaskets
The gasket helps seal the joint between adjoining rolled-lip duct components.
Standard and high-temperature gasket options are available depending on the
clamp configuration.
Replacement gaskets should be matched to the correct clamp size and application.
Clamps for Galvanized & Stainless Steel Ductwork
Quick connect clamps are used with compatible galvanized steel and
stainless steel rolled-lip ductwork, including straight pipe, elbows,
tees, branches, reducers, adapters, blast gates, valves, and end caps.
Choosing the Correct Quick Connect Clamp
When selecting a clamp, verify the
duct diameter, rolled-lip connection type, gasket type, and operating
temperature.
Clamp size must match the diameter of the adjoining rolled-lip components.
High-temperature applications should use the appropriate gasket configuration.
Don't see the quick connect clamp you need?
Search ProAirSupply by duct diameter, gasket type, temperature requirement,
or part number to locate additional clamps, gaskets, and rolled-lip ductwork
accessories.
Shop Quick Connect Clamps & Gaskets
Browse quick connect clamps for rolled-lip industrial ductwork from 3 through
24 inches. Select standard or applicable high-temperature gasket configurations
to connect compatible galvanized or stainless steel duct pipe and fittings.
