Quick Connect Rolled Lip Tees
ProAirSupply offers quick connect tee fittings for industrial dust collection,
ventilation, and material conveying systems. Tees provide a 90-degree branch
connection from the main duct run while maintaining the same modular rolled-lip
quick connect system.
Quick connect tees are available in galvanized steel or stainless steel
with multiple main duct and branch diameter combinations.
Looking for a specific quick connect tee?
Enter the main diameter, branch diameter, material, gauge, or part number in the
ProAirSupply search bar to locate available duct fittings.
Quick Connect Tee Sizes & Configurations
|
Specification
|
Available Options
|
|
Main Duct Diameter
|
Multiple sizes within the 3" through 24" quick connect ductwork range
|
|
Branch Diameter
|
Varies by main duct size and fitting configuration
|
|
Branch Angle
|
90°
|
|
Material
|
Galvanized Steel or Stainless Steel
|
|
Connection Type
|
Quick Connect Rolled Lip
|
90-Degree Branch Connections
Quick connect tees create a 90-degree branch from the main duct line and are
useful for connecting secondary duct runs, machines, pickup points, or equipment
connections into the primary dust collection system.
Tee configurations may use the same diameter on all three connections or a
smaller branch diameter depending on the fitting required.
Main & Branch Duct Diameters
Quick connect tees should be selected using both the
main duct diameter and branch diameter. Always verify both
dimensions before ordering, especially when the branch is smaller than the
main duct.
Galvanized Quick Connect Tees
Galvanized steel rolled-lip tees are available for compatible galvanized
quick connect duct systems. Match the duct diameter, branch diameter, gauge,
and connection style to the adjoining components.
Stainless Steel Quick Connect Tees
Stainless steel quick connect tees are available for systems requiring
stainless construction. These fittings connect to compatible stainless
rolled-lip duct pipe and fittings using quick connect clamps.
Rolled Lip Quick Clamp Connections
Quick connect tees use formed rolled-lip ends designed to join compatible
ductwork with quick connect clamps. This creates a modular system that can
be assembled, serviced, or modified without traditional bolted flanges.
Tees vs. Angled Branch Fittings
A tee provides a 90-degree branch connection. When a more
gradual angled entry is required, a lateral, Y-branch, or other branch fitting
may be more appropriate for the system layout.
Building a Complete Quick Connect Duct System
Quick connect tees can be combined with straight duct pipe, elbows, reducers,
laterals, branches, double laterals, Y-branches, blast gates, adapters, and
other rolled-lip components to build a complete industrial dust collection
or material conveying system.
Choosing the Correct Quick Connect Tee
When selecting a tee, verify the
main duct diameter, branch diameter, material, material gauge,
and rolled-lip connection type.
Not every combination of diameter, branch size, material, and gauge is
available, so confirm the complete fitting configuration before ordering.
Don't see the quick connect tee you need?
Search ProAirSupply by main diameter, branch diameter, material, gauge, or
part number to locate additional rolled-lip duct fittings.
Shop Quick Connect Tees
Browse quick connect rolled-lip tees in galvanized steel or stainless steel
for industrial dust collection and material conveying systems. Select the
main diameter, branch diameter, material, and gauge required to match your
quick connect ductwork.
